Forum: RADIO DASH KITS & HARNESSES (PUBLIC)

Im trying to get it installed, obviously, and when i bought it the sales rep told me to request a "tech sheet" which i forgot to do. So i emailed them again and asked for one, and they sent me here. Anyone know which wires on the replacement harness, go on the main harness in the car? Some are...

Hi all, I have a 95 Alfa 164 which is fitted from the factory with a Fujitsu Ten connected to underwear amp using an iso connector and an 8 pin din connector from head unit. I am attempting to install a jvc receiver. I have the iso adapter and could bypass the amp. Still, seems better to...

Is there a Molex connector for the speaker bundle that connects to the factory amplifier? I want to replace head unit, replace speakers, and add new amplifiers but do wish to keep as much cabling intact.

I just purchased a 2008 Toyota Camry Solara with JBL Factory navigation. I would like to add a license plate backup camera, and need to know if there is a wiring harness adapter available for this unit that would make the camera install 'plug and play'. If a harness does not exist, then any help...

Questions about NFINITI G35 RADIO DASH FIT KIT (2003-2004 INFINITY G35) Hi everyone, is there anyone tried to install this kit on a JDM G35 (Skyline 350GT)? I'm living in Asia and i want to order this kit, but i'm not sure about the A/C control panel was fit with the JDM, can anyone help me? Thx...

OK, so I received my interfacing equipment today. Thanks for the rapid service! There are 4 gain settings on the unit, one for each channel. How do I properly adjust the settings? There are NO instructions provided. Also my aftermarket amp. has gain settings. What is the order of operations?...

I have a 2001 Yukon Denali Xl and i just ran across this website; I am planning on doing my install myself as i have moderate experience in doing so. I have a Pioneer AVH4000DVD that i will be installing in the factory location; as this will require me to do a few mods to the entry point of the...

I want to remove the factory radio 86120-52241 from my '04 Highlander and install what would have been the factory radio upgrade 86120-48430. This is a 6 CD changer with RDS. BUT the connectors are DIFFERENT. The old one uses a 6 pin and 10 pin connector, the new one uses a 20 pin connector, 12...

I have a 2007 Kia Optima and trying to get the factory radio out. Any suggestions on how to get the factory radio trim off with out breaking anything

Looking for correct Double Din Plate for my dash has the round indents on the sides.

I am looking for a dash kit that is silver to match the interior of my brothers honda civic si 2005. I have a harness and radio. The retail stoor only had black. Is the silver dash kit that is available at this sight the correct one to purchase for a single din, CD/ipod reciver? We are looking to...

I need some help. I purchased the GMCSS-3 (Was shipped the GMCSS-3A) harness from here, I was able to install it just fine. With the IHF-1000 MOTO adapter. The trouble I am having now is once I start the truck and the radio powers on now it shows BLUETOOTH all the time and will not switch back to...

I have a UK spec Lexus LS400, with a pioneer head unit and amp in the trunk/boot. I bought an after market head unit to fit, but I found that my Meta adapter kit's amp integration plug does not fit. Then I realized that in fact I can get NO harness adapters at all for anything on this particular...

i need wire color codes for factory wiring harness for cd player 2000 mitsubishi mirage sedan DE

I'm wondering if the radio dash kit for Audi ( #6924 ?, width up: 25cm, down 23.5cm don't now the meashures in inches..) is suitable for my 5/00 A4 b5 audi with symphony 1 cd/casette player? Would really want to install my alpine 2-din player there but we don't seem to have that dash kit...

Finally decided to make some changes to my endeavor esp. with the amp. I've looked around many sites and found some harnesses but what they are saying, I don't know if it'll work since I'm still a newbie to this sound system world. So basically I'm trying to find a harness that will allow me to...

Hi I purchased a sven4 peripheral kit sku number 2677 its to retain the exsisting bose amp and speakers while adding a new head unit. Most of the wires plugin to the interface but there are seven wires total i need to identify to connect to the new head unit. they are as follows a red, black,...

I am installing an amp in an 07 Jeep patriot and need to know which wire is the radio start wire so that when I turn the radio on it powers the amp Please Help

Hello, I am Giovanni from Costa Rica in Latin America. A few days ago I won an eBay´s auction for a 2009 CR-V Radio/CD MP3 WMA Player "for a few more dollars". I am very excited to up-grade my OEM 1999 Radio/Cassette Player with this brand new CD player. Does any one knows if it is possible to...

hey so i've set up my subs but my car speakers were stock so i ripped them out yesterday and plugged in two aftermarket ones. then i took the two 6x9s out of my truck to put in my car. i took out the cd deck, and there was a green wire labled rear left speaker and another labled rear right speaker....

I replaced this stereo (Pioneer) that I had in my Camaro with a JVC. At that time I used the Pioneer power plug with the with the JVC. I had to move a few of the wires as it was wired a little differantly. Same plug but wires in differant locations. long story short, I got rid of the camaro and...

i need to know if this dash kit bring all the cables we need?

WHEN YOU BUY FROM US, you get SUPPORT You will get access to the "CUSTOMER AREAS" where we provide tech info, support and the latest news updates on the products available on our site. Thousands of messages, thousands of customers, JOIN US, buy from a REAL COMPANY founded by REAL installers!...

Previously I purchased the harness for my 2003 honda accord shown here : http://www.autotoys.info/forum/showthread.php?t=5924 I didnt think about it and neither did the installer until he gutted everything in my car and realized the harness did not fit.:mad: ... Well when i ordered it i was...

hi i have purchased a oem navigation unit for my mercedes c230 2007 and need help on installing it. my dealer will not do it for warrenty reasons. i need help and would like an installer in the Little Rock Arkansas area thanks

I need the harness that allows me to use my car speakers rather then use the speaker that is provided with the ihf1000. I went to my local stereo shop and they couldnt find the harness that i need for my car. I have a 2003 honda accord, also id like to hook up my iphone and be able to...

I just purchased a used 2004 Acura TSX, with factory radio and navigation system. In all of our other cars, we have Kenwood excelon radios installed. I have taken out the equipment from the one that is going to be sold, including radio, amp, and sirius tuner. What I think I want to do is..Keep...

Im having trouble with my nird-01 in my 08 sentra, seems like a bug when i use the cruise control the mpg gets crazy 400mpg or more. i did do what the directions say and that fixed it originally my temperature and mpg was way off. now it works ok except when i use cruise control mpg steadily climbs...

I bought a Kenwood 4 channel amp and i'm looking to install it to my factory deck using the GM SVHGMAA1 SVEN4 CLASS 2 ADD AN AMP INTERFACE #10843. Will this work? I'm asking because my car is not listed on the product page but the connector looks just like that. Thanks in advance, Vince

Hi, OK, 1st up, we're in Australia. We are looking to install a stereo from our 2007 Toyota Prado into our lil' 1990 MX-5(miata)to try and keep a factory look to the car. We would also like to run an amp for the main speakers/possibly a sub/hardwired ipod and control the illumination. ...

If you are having problems with the MPG totals on your NIRD SEntra Bluetooth adapter, see this thread http://www.autotoys.info/forum/showthread.php?p=10927#post10927 the password to the forums is listed on your invoice.

I own a 2005 Monte Carlo LT. Mach 1 was trying to sell me one for 200$ I think the one I need is a SCOSCHE GMOS2B11, but I don't want to waste my money on something that isn't going to work. Although they've discontinued that part from their site.

I been wanting to put a DD size head unit in my 96 Blazer. The stock radio is 1.5 din size and their is also a 1/2 din size storage compartment under the stock radio. I found a pic on the site so I know it can be done. Just need to find out what parts and what mods need to be done. ...

Hi i am looking for Daihatsu Sirion 2006 Stereo Install Dash Kit or anything similar even if had to make few cuting to fit it in or its possible find someone make a custom made http://www.carpages.co.uk/daihatsu/daihatsu_images/daihastu-sirion-interior-04-02-08.jpg anyone can help??

I have a 1996 Ford Crown Victoria police interceptor and wanted to know if the type II Ford Double Din dash kit would fit my car. If so I would be very happy to place that order with you guys.

I am wondering what I need (dash kit, wire harness, removal tools) to replace my stock stereo with an aftermarket? Links to the correct part would be great as I have looked and am having a hard time having success. Also, if I keep my stock stereo is it possible to attach an AMP with after market...

I just installed a new deck in my Tahoe. It's working great, but for some reason I'm only getting sound out of 4 of the 6 speakers. The speakers in the back doors don't work, only the 4x10's in the very back work, and the speakers in the front doors. I spoke with a car install guy, and they told...

I cannot find a wire harness diagram (color code) for a 1997 Hyunadai Tiburon(RC) anywhere online. I have found color code diagrams for a 1999 to 2007 tiburon (google the12volt and modified life), however, the wires are different colors from the 97. I'm trying to install a pioneer head unit,...

Just wondering what dash kit I need to install an Avic A3 (Double Din) in a 2008 Audi A3 with a base stereo. Also, what will I need to connect the Avic to the steering wheel controls? Thanks

Getting ready to install a double DIN nav unit in the wife's Yukon. It's an SLT with the std. Bose system, not factory nav or satellite and no rear dvd, just basic Bose 6 disc in-dash. Really confused with all the Bose / Onstar harnesses, some say amplified, non-amplified, 01 and 02 versions,...

I don't know what my Customer # is, as this is my first purchase and I didn't receive this info in an e-mail, but here is my Invoice Info: Date: 12-28-2007 03:42:03 PM Item: PERIPHERAL MAZASX AUXILIARY INPUT ADAPTER http://servemx.com/mazda/unplugged.mp3 Here's a sample of the beeping when...

Im looking for a 02 Mercedes ML500 aftermarket Fiber Optics Wire Harness i know of a 70-1786 harness but that doesnt work with a fibre optic connection Has anyone installed this wire harness QCHBB-MBZ?? I was told that i had to rewire the whole truck and i cant use the factory amp and...

I have a 1999 ford windstar van the oem radio has no power. I checked all fuse's they are ok so i started checking wires from the radio I have switched power witch is a pink wire. That is all the power i get from the wires key on or off. I need to know what color is the constant power wire...

Hi there, I am trying to fit a new radio in my 1999 Mercedes Sprinter 308D van (after someone broke in & stole the old one!!!) These are the wires coming from the dash. Can anyone tell which is what? 1. Black with Red trace 2. Black #1 (thick wire) 3. Black #2 (thin wire) 4. Brown...

Hi i am new to this forum i am installing a alpine cda9883 in my car and i was wondering if there a harness that i can use so i will be able to keep my factory amp i searched but there is only one for the 98 and up lexus any help wil be appriciated thanks alot.