Forum: Car Alarms, Remote Starts, Sensors, Immobilizers, Relays, etc (PUBLIC)

just bought the PYTHON 5303P LCD 2-Way Security System with Remote Start & 4-Button Remote , WINDOW ROLL UP MODULE BASIC 529T , and the ADS-DL-CA2 IMMOBILIZER and DOORLOCK BYPASS and CANBUS (ALL CARS, INCLUDES CAN BUS). i have a 2007 chevy monte carlo ss. any wiring sheets you can send me will be...

how can i get the complete youtube video of the Acura MDX Remote Start Alarm Installation with IDATALINK and DEI PYTHON Remote Start by autotoys.com

Hi ive been in the process of wiring the idatalink to my prestige ss6900 on the bench. My question is about the +12 volt wire. In the idatalink guide (#7326) it shows what wires are required. my question is does the +12 volt wire from the idata link connect to the (2) fused +12 battery wires on the...

Hi I bought a I datalink ads-tbsl-ko... Programmed for my ridgeline, everything was fine for about three weeks when immobilizer light came on and truck refused to start, tried neumourus times to start with remote and manual. No good had to remove bypass and truck started... So now I can't use my...

I purchased this back in 2010. I can provide order #. It worked for about 4 months. It was great until then, but now I plan to replace it with something else. But before I do, any ideas as to why it suddenly couldn't tell the difference from 2 feet vs 10 feet? The voice went crazy and randomly...

i need help finding a transponder bypass kit or an immobilizer that works for my 1998 mercedes E series sedan. I need one that works without a key, the person thats installing my alarm is trying to charge me 500.00 telling me that there aint no cheaper one. he says my key has a laser, and my key is...

I bought a lock pik in december, installed it in my 2010 suburban, and it worked fine, went on a trip with a friend that has a 2008 suburban, so installed it in there and it worked good, after trip, installed it back in my suburban, and not I can't get it to work. Any thoughts?

I am tryin to hook up this remote car start w/ alarm but I'm confused. I read the diagram that comes with it but it doesn't tell u where the wires are supposed to xonnect to. Can some help me understand the wire setup?

Hi, Has anyone ever installed a remote start on one of these NCV3 Sprinters? Looking to do this without sacrificing a key and hoping someone has information about which bypass/CAN modules will allow this to happen. Thanks!

ALL of our YOUTUBE videos have EXTRA footage. Paying customers who buy the complete systems get access, only on request and when we verify purchase. We deliberately left out iMPORTANT steps, like how to run wires, how to mount modules, how to mount certain parts of the installs, wiring...

ALL of our YOUTUBE videos have EXTRA footage. Paying customers who buy the complete systems get access, only on request and when we verify purchase. We deliberately left out iMPORTANT steps, like how to run wires, how to mount modules, how to mount certain parts of the installs, wiring...

I bought your Compustar 6200S. RF-2WG5-SH, and Blade cartridge that plugs into the 6200S that is programmed for the Honda Fit. Wiring went well and I didn't find this difficult to install but the remote starter does nothing. All I can do is unlock and lock the doors with either remote. I did not...

See our channel at http://www.youtube.com/user/TheAutotoys http://www.youtube.com/user/TheAutotoys http://www.youtube.com/watch?feature=player_detailpage&v=q75SMtTrZzU http://www.youtube.com/watch?v=80ROpgTZlKA

I have an '07 MDX and I'd like to get a 2 way remote starter w/lock/unlock. I don't think i need an alarm since the factory one should be fine. What are some models and what would i need for the immobilizer bypas?

I'm considerring buying the Crimestopper RS-00 Remote start kit and I have a few questions. I know for using a anti-grind/starter output I'll need a relay that needs to be wired into the starter wire. I have a 2002 Toyota Camry that has 2 starter wires, do I need to get 2 relays or is it possible...

My VIPER Remote Start Alarm (5900) was installed in my 2000 F150 Ford for about 3 years… I got rid of that and traded with my mom. She had a 1998 Toyota Camry LE V6. I'm trying to install it in this… But I've got some Questions about the DEI 5900 PDF I've Downloaded. Question's below. 1)...

Hi, I need a tech sheet for a 2010 Ford F250 and specifically where I find the ground while remote start wire connection. I am using a PKFORD immobilizer module... I am a customer and my order # is 32-101008-xxxx Thanks!!

Hi, I am looking over the manual for the STARTNR2. I am planning on putting this in a 2008 Honda Ridgeline. Can someone clarifiy for me the parking light wires see a cut from the manual here : H2-2 RED (FUSED): PARKING LIGHT INPUT: - This input will be determined depending on the type of...

i put it in the car but i cant get it to work need help?

I am looking to add a Keyless entry system to my car. The vehicle only came with power locks. Would this product fit this purpose: http://www.autotoys.com/x/product.php?productid=5031 Or what do you recommend for less than $75. Thanks

I just installed this on my 1996 Nissan Maxima last night. Everything works as it is supposed to except the trunk release doesn't work. I double checked the wires to ensure there was continuity and there was. The wire on the remote start is Red/white that says to connect it to the purple/yellow...

I am interested in buying/installing a 2-way remote start/alarm in my 2004 Toyota Tacoma. Would this require any special interface moduel to interface with my factory alarm/keyless entry? I would not want to carry 2 remotes. Thanks,

I want to remove a TRIAD car alarm system installed in late 1998 or so. I bought a used Mazda minivan without any remotes or instructions/schematics. My minivan has Power door locks. I want to carefully remove the old Triad car alarm wiring and install a good basic car alarm that will also...

hello everybody. i'm new in this forum . i want to try install an alarm for my toyota rav4 2002 . can you help me to find the places to connect the wire. with photos if this possible . thank you a advance.

I purchased 2 Crimestopper RS4 Keyless Entry/Remote Start(formerly rs900 rs1304 Phase 7)#12 and it included a 2008 Ford Edge Crossover remote start/security. I need one for a 2008 Ford Taurus X and... 2009 ford escape wiring specs I have emailed autotoys and they tell me to ask in forums. I am...

need remote start tech info sheet for 2007 chevy silverado crew cab 1500 with idatalink ADS-AL - GM3 --------------------------------------------------------------------------------

hello.i have a gsm/gps car alarm spy for my car (mitsubishi lancer 1999) and i have problem in installation with start engine. this is my car alarm with installation diagram. **EDITED NO EXTERNAL LINKS*** in the page of wiring installation the red/green wire i dont know what it says and i...

I was needing help getting an installation guide for a 2002 Toyota Camry 6cyl for a crimestopper remote starter.

bought a replacement transmitter for a CS RS900 #9645. are there any programing instructions out there. what is the little button on the side of the transmitter?

bought a replacement transmitter for a CS RS900 #9645. are there any programing instructions out there. what is the little button on the side of the transmitter?

Just ordered an AUDIOVOX XR6900 and a ADS-DL-CA IMMOBILIZER and DOORLOCK BYPASS . Was looking for installation instructions for these and cannot find them. Just wanted to make sure that this is the correct equipment for my vehicle.

http://www.hktuning.com/shop-cloverleaf/enginestartalarm2.jpg I just need pictures to help me install an aftermarket alarm system

I installed an alarm on my 2004 chevy silverado, the truck didn't have power locks or windows, I hooked up the power windows no problem at all, now I'm adding power locks. I want to know how to hook up these actuators to my alarm. I hooked up 2 relays it will unlock it just wont lock. please help...

I just installed an alarm on my 2004 silverado base model, no power windows or locks, 2500 series if that matters. I was told I can hook this up without hooking up the tach wire, when I try to start it it runs for a few seconds then shuts off. let me know what I can do. at frst I tried to hook up...

order id #28-090907-xxxxx I recently installed a remoter start/keyless entry(23927) by designtech into a 99 grand am 4dr, pw locks. Got everything to work except the keyless entry. I recently bought doorlock interface # 187 and was hoping to find out the easiest way to wire this thing. Thank...

will the PPKF1 be compatible with my truck?

hooked up remote start with data bypass truck starts up and runs when activate remote start but when get in put key in and turn to run position to disable remote start the transmission will not down shift i can stop put in park turn off car restart car with key all is normal only happens when i use...

i have recently installed a remote starter on my accord. using the wire diagram provided by u guys i have tapped into the "blue" wire in the drivers side door to "disarm" the factory alarm but keep the doors locked. now when i activate the remote starter the car starts, the doors stay locked but...

WHEN YOU BUY FROM US, you get SUPPORT You will get access to the "CUSTOMER AREAS" where we provide tech info, support and the latest news updates on the products available on our site. Thousands of messages, thousands of customers, JOIN US, buy from a REAL COMPANY founded by REAL installers!...

Can anyone give me information on finding a remote start for my car? From what I've been told is that I need a bypass and maybe a transponder. As you have noticed I don't know anything about cars. I know how to change my oil and brake pads and that's about it. While asking around I have herad...

I installed a remote start on a 2008 toyota sienna van and wondered why the factory transmitters will not control the locks while running. thank you

The wiring color on the plug do not match the wiring diagram that came with the startnr2 unit I bought. Any ideas?

bought the ads-pl datalink solo series ans a hornet 570t remote start need wiring for datalink and any help would be greatful Thanks