Forum: YOUR INSTALLATION (PUBLIC)

HU: Kenwood KMR-440u - 22 watts RMS/50 peak x 4 channels Speakers: Polk MM691 - 2.7 ohm, 125 watts RMS/300 peak If I run 1 channel directly (series) to 1 speaker, what are my watts to that speaker? If I bridge the speaker directly to the radio what will happen? My objective: get the most...

i am installing a Kenwood Cd Player in my 1988 Daewoo Coupe and need some help with the colour codes of the cars wiring...

The light on the remote comes on but the amplifier won't play. The inside of it sounds loose. What do I do to check it?

pionear deh 2200ub radio didnt come with stock wire harness ,got one at pep boys but the other end doesnt match plug going to car .went online for diagram but still have questions. such as what color wire goes to what ie. speaker wire colors , memory, power and so on, car is 2005 dodge magnum,...

Hi, I installed the uPAC-HON1 in my 2005 honda. It was working fine until my battery went flat. After changing the car battery and putting in my radio security code, I switched on my radio only to find out that XM functionality had disappeared. In other words, when I press the CD/AUX/XM button its...

how do i install a steering wheel control interface on a 06 honda pilot i need to know how to connect it properly every picture i look at versus the looks in the car are totally different

need instructions for peripheral seven 4 line out converter. thanks

i need a wiring digram for a seven 4 line out converter,color coded would be even better. thanks

I want to install Rockford Fosgate's 360.2 into my truck, but i need to know the wire color codes for my radio, i have the 07 Toyota Tundra SR5 (not the 5.7) with the 6 cd changer it has three different harnesses coming out of the back. any help will be appreciated. thank you. Jess

Can anyone tell me the easiest place to tap into the speed sensor and back-up sensor on a 2010 F350 Diesel? I'm getting ready to install my AVIC D3 in my new truck.

I just installed the Ventura Technology Ipod/Aux Interface in my 2007 Accord. The interface works great with the Ipod and aux inputs. The radio displays the info for my Ipod. My problem is that I cannot get the XM radio to play now. When tuning to an XM station the radio displays "NO DATA BASE"....

:confused: installed pac swi-x in 2007 mazda rx8 to pioneer avh-p4100dvd, i followed the instructions. i programmed the pac swi-x to version 3 as stated, but when i try to program it doesn't program. what its doing is i hold the program button and the steering wheel button til the light goes off...

i'm installing an huatai ht-800d on a chevy silverado 1500, 2007 with remote starter and also get a transponder bypass ADS-AL CA 64, BUT i'm wonder that there is no an wiring installation dyagram for this car with this kind of bypass, will be this one the right one for my car or where i get to go...

I am trying to install remote start on my toyota pick up 1991, I don't have any power window,door,alarm,ect I install all wires but is not working properly,I press the start button it start but after few seconds it turns off the light code flash 7 times, that diagnostic is the systemdit dit not...

I drive a 2007 NBS sierra with factory Nav radio Options are rear ent dvd xm what I am wanting to add to my truck is an ipod interface that will work with all existing equip also I would like to add bluetooth and a GM lockpick to onlock my nav in motion. I guess what i'm looking for is a shopping...

I've been looking for the wiring of my car radio's cassette player. I can't find it anywhere. It is a two part radio (radio which is then connected to a cassette player that is under the dash) in a 94 Pontiac Sunbird. I'm trying to hook a auxiliary port up but I don't know which wires are which...

Can someone please advise me on where the best place to ground a Kenwood amp would be that I am installing in a 1997 Ford Thunderbird? I am installing a Kenwood KDC-X693 head unit in the dash and placing a Kenwood KAC-8404 4-channel amp under the passenger seat. I am seeking advice on where to best...

What does each wire go to in the factory 2000 dodge ram factory door harness (the harness that connects near the left kick panel) Basically I am replacing all the original factory ram wiring and putting in a dakota factory wiring harness....i did an engine upgrade....basically i want to connect...

I just purchased a an RF add on CD changer from CarToys. Most likely it will be a trunk install. The car is my wife's '97 Mercury Sable. Can any one tell me the easiest places to pick up the accessory and power leads and also the best way to tie into the antenna lead? The antenna is...

need help with 94 pontiac sunbird color code plese help

i want to install a cd pleayer to my car , but the factory harness dont have the acc wire , i try to looking for the acc wire in the fuse box and in the door , but i can't find it , the special harness come with the acc wire but it cost to much ( $139 ) , do any one know about it ?

I just bought an 06 Envoy and want to install a DVD player for the kids. I have an in-dash cd/dvd player with screen that flips up. I am looking online for an additional monitor to mount (roof mount) for the back seats. Can anyone help me out by telling me the best route to go while trying to do...

Hey so i have a 96 audi a4 and just got a cd player and want to put it in. It is brand new so i got all the wires and i got a wiring harness. i got a few different questions. The first is which wires do i need to splice rcas into to hook up to the back. i was told i had to do this because some...

Hey so i have a 96 audi a4 and just got a cd player and want to put it in. It is brand new so i got all the wires and i got a wiring harness. i got a few different questions. The first is which wires do i need to splice rcas into to hook up to the back. i was told i had to do this because some...

the original radio wiring harness for a mazda mpv van have been cut and i have to install need help for the color coding plz advice... have searched the internet without success thanks

Please provide me with the cd changer installations procedure and installation photos. What do you when you get the message NO DJ?

i am tryin to install a deck in to my contour i can get it to power up and everything but the sound isnt working the car has a built in amp i was told i have the right harness to by pass but im not sure if ne one has any ideas why i cant get ne sound out of it that would be great

I have a 1989 Maxima with the Bose stereo. I am installing a Pioneer CD player, nothing special. Well I have done this plenty of times but on this one everything works and lights up but I'm hearing absolutely no sound. I've tried different variations of wire color connecting, where I had slight...

I am going to be installing a AVIC-D3 this weekend into my 2004 Ford F-150 XLT. I need to find the "Car Speed Signal" wire from (I'm assuming) the computer. Can anyone tell me where the computer is located in this truck and which wire I need to splice into? Is this a wire that is found on the...

I have a question regarding my audio system. I have factory speakers in the front driver and passenger doors and i have two alpines in boxes in the trunk that connect to the wires in the back passenger doors. I also have a 760 watt sub and an Alpine type X sub ( had a better amp but i believe it...

Hi All, I'm planning an install on a 1998 Chry.Sebring with premium (infinity) sound. The unit I'm installing is a Sony CDX-GT61IU. I would like to incorporate the existing AMP for the rear speakers. Can anyone advise on the proper Harness/hook up for this install. Thanks...

anyone out there ever installed aftermarket projector headlights? i put them in my 2000 dodge ram and the bright light indicator stays on all the time. when i do switch to "brights" the lights seem to dim and are basically worthless. the truck has three wires at the plug and they all show 12v when...

Can anyone help with a wire diagram? Previous owner just removed stereo by cutting wires and taking plug and all

i have a installation question. im wanting to know if i can tap into the GPS (from my onstar connection) to hookup a in dash navigation? please guide me as to what i need, if this is possible. i have an 08 chevy silverado LT. the only thing i dont have on it now is factory nav and/or bose. ...

I have a 1994 Ford Explore and have the special key tool thing to get the radio out. The U shaped one's! put the tool in the holes and pushed it in about half way and tried everything to shake it, pull it, and kicked it. So yeah how the fu@k do u get that sh!t out of there? baseball bat? hammer?...

Hey guys! my name is natalie. i have an '88 camry with lower dash front speakers. i just purchased some new speakers. but, alas, i do not know how to remove the old ones. these speakers are weird because they are actually in the front dash. one to the left of the steering wheel, and one to the...

We just installed a new Sony Xplode CDX-GT7010 in our 1978 Stepside. Everytime we shut off the truck the stereo is resetting losing all of our settings/channels, etc. We followed the instructions bur don't know what is wrong. Any suggestions?

Sorry, I originally posted this in the wrong section (I think, probably should be here, not in Installers Only). I have an Acura TSX and I would love to add my PPI 10's to the trunk. I was planning to simply step down the rear "subs" signal to feed the PPI amp, but having looked at the signal,...

I have an 04 Suzuki Forenza. Any one know how to connect the amp to the factory stereo?

Please help - I have a 91 Beretta and have checked the fuses and replaced the headlight switch. Not sure where to go from here? I just know I have no headlights, no dash lights, no turn signals, and no horn .. sounds maybe short? anyone got a wiring diagram or any suggestions besides junk it ??...

i am installing a kenwood ddx 8019 and now would like to know if there is a way to use the factory monitor with this system. i've removed the factory bose system and lost power to the dvd system.

Hi there i am trying to install amp and power it without a head unit. the amp has live, ground and remote. does the remote wire need 2 b conected 4 the amp to power up? and if so, where do i connect it if i do not have a cd player?? seeing as i intend using PSP as my head unit? thx KDee

Lost Directions, this is a 4 dr. and these visors has 3m tape but there is chrome molding around doors it doesn't seem like a very good fit or does these go in channel. Thanks

i am looking to install a double din pioneer or kenwood GPS/DVD/Navi unit into my 02 suburban. can someone give me specifics as too what im going to run into? i have been told i will need the PAC CM1 and OS1 or OS2, but everything i read says these arent compatible to my 02 suburban. i do have...