that wire is your power antenna it should be connect to the wire that is yur power antenna.
|
| shop now for our products (17+ years online) |
Would like help please.Removed blauplunk radio which was connected to an electric aerial.. Connected new kenwood cd radio with the iso connector,radio comes on with ignition but aerial does not raise.I am left with one blue and white stripe wire which is says on it ANT CONT does this connect to a 12 volt supply from the ignition or what any ideas please.
ambiente
that wire is your power antenna it should be connect to the wire that is yur power antenna.
if any one knows the wire color codes for a 2001 sunfire i would appreciate it if they let me knw because i can only find the old ones and the car has a purple wire i have no clue what it is. thank you
I dont have any other spare wires .Besides the speaker wires in the iso block ,i have a permanant live ,a switched live ,a ground earth ,and a power antenna cable which is connected to one blue and white cable via the iso block.The spare blue and white cable comes from the rear of the radio connection block.Which idid not have on the blauplunk radio.
ambiente
hmm not too sure then, thats weird
Put your old radio back.
You will have one wire that will show 12 volts only when the radio is on (turn it on and off to test this with a test light or digital volt meter set to DC)
Make a note of this wire
With your NEW radio, connected, turn on and off the radio, see which wire shows 12 volt when the radio is on, it should be connected to the same wire you noted previously with the old radio.
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
For the sunfire, it has data. To keep the factory chimes, etc, you need a special interface
See below
AXXESS METRA GMRC-01 CLASS 2 DATA INTERFACE
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
Thanks for that autotoys all is working ok now.
ambiente
Originally Posted by ambiente
Glad it worked out.
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
thank you i think i might just not change thesterreo in thcar i already put so mch money in t jsut trying to puta new deck in the car. thankyou for all your help, helped me more than any one else did
There are currently 1 users browsing this thread. (0 members and 1 guests)