Reply With Quote
First you need to get a digital volt meter, this will test for your power, ignition and ground wires. Then hopefully your vehicle is not factory amplified and you can started testing for the speaker wires, write back if you need help with that.
|
Existing Customer: Post inside the "CUSTOMER's AREAs" |
See our "real life" diy Autotoys.Com Installation videos here |
 | shop now for our products (17+ years online) |
Stereo wiring for a Fleetwood angler camper
Finally putting a stereo in my camper but the harness is bare. Not sure where else to ask so can anyone here tell me how the raw wires should be connected to the radio harness?
Thanks for any help at all!
First you need to get a digital volt meter, this will test for your power, ignition and ground wires. Then hopefully your vehicle is not factory amplified and you can started testing for the speaker wires, write back if you need help with that.
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
