2004 XLT Car Speed Signal Input

[Corbin]

I am going to be installing a AVIC-D3 this weekend into my 2004 Ford F-150 XLT. I need to find the "Car Speed Signal" wire from (I'm assuming) the computer. Can anyone tell me where the computer is located in this truck and which wire I need to splice into? Is this a wire that is found on the back of the guage cluster?

I also have to tap into the Reverse gear signal wire and the parking brake wires. Any advice on this?

Are there any links to wiring diagrams?

Any help would be great.
Thanks
Corbin

[autotoys]

Hi,

We have info on the VSS wire only
We do not have info on where the computer is in the vehicle.

See VSS WIRE Gray/black At PCM, pin 63

or heritage

Here is info on the F150 HERITAGE 2004 model
Position 11 and 12 is the ENGINE BAY on the firewall PASSENGER side

VSS Wire: LOCATION 11 OR 12- POSITION 58 OR 68 OF 104 PIN CONNECTOR
VSS Wire Color: GRAY/BLACK
VSS Pulse: 8000
VSS Tach Wire: LOCATION 11 OR 12- POSITION 48 OR 78 OF 104 PIN CONNECTOR
Tach Signal Wire Color: TAN/YELLOW OR PINK/WHITE
Brake Switch Positive: GREEN/RED
Brake Switch Negative: GREEN

[Corbin]

Thank you. I'll get right to the install. I can't wait

[Corbin]

In case anyone else is wondering I found the vss pin 63 on the middle PCM plug located on the passengerside firewall in the engine compartment. You'll have to pull the plastic cover off of the plug to find the numbering and unwrap the tape from the wire bundle to expose enough wire to splice into it.

[autotoys]

Thanks for the feedback. I am glad our info was correct.