keyless entry

[blizzardblind]

order id #28-090907-xxxxx

I recently installed a remoter start/keyless entry(23927) by designtech into a 99 grand am 4dr, pw locks. Got everything to work except the keyless entry. I recently bought doorlock interface # 187 and was hoping to find out the easiest way to wire this thing. Thank you for your time

[autotoys]

It looks like your car is a single wire system.

Set up the 451 for a 3 wire negative pulse system

Then

Lock WHITE DRIVER KICK #217
Unlock SINGLE WIRE SYSTEM PANEL **


Doorlocks Are Found As A Single Wire System.

A Negative Pusle On The WHITE Wire In The Driver Kick Panel Will Lock The Doors.

FIND a 1.5 K RESISTOR in the package or put 2 resistors together to get it to around 1.5k and wire it to the SAME white wire and then wire it to the UNLOCK wire output of the 451

A Negative Pulse Thru A 1.5K Ohm Resistor On The Same WHITE Wire Will Unlock The Doors