Reply With Quote
Did you program the tach?
Page 9 of manual
1. turn on ignition
2. Enter programming mode, branch 10
3. Press button 1
4. Parking lights will flash one time
5. Turn engine off
THE LED light will flash 4 times if the tach signal was NOT learned.
|
Existing Customer: Post inside the "CUSTOMER's AREAs" |
See our "real life" diy Autotoys.Com Installation videos here |
 | shop now for our products (17+ years online) |
Remote start installation.
I am trying to install remote start on my toyota pick up 1991, I don't have any power window,door,alarm,ect I install all wires but is not working properly,I press the start button it start but after few seconds it turns off the light code flash 7 times, that diagnostic is the systemdit dit not detec the thach signal but the wire is plug,my remote start is WARLOCK WS-60RK I hope you somebody can help me with thi problem.
Did you program the tach?
Page 9 of manual
1. turn on ignition
2. Enter programming mode, branch 10
3. Press button 1
4. Parking lights will flash one time
5. Turn engine off
THE LED light will flash 4 times if the tach signal was NOT learned.
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
