gsm/gps car alarm problem

[karasarinis]

hello.i have a gsm/gps car alarm spy for my car (mitsubishi lancer 1999) and i have problem in installation with start engine.
this is my car alarm with installation diagram.

**EDITED NO EXTERNAL LINKS***

in the page of wiring installation the red/green wire i dont know what it says and i cant connect in my car.can someone know what is this??

the problem is with start engine.i bought a universal bypass kit with ring and the key into the box and i can start my car without key if i connect the wires but i cant with remote start of my alam.it can take the signal to startup the engine but something block at the startup and it cant start.the lights in the dashboard was on after a false start up.what is wrong??

the manual it have a schedule with a relay.this relay was connected.after the installation of the alarm the car can not start with immobilizer and i bought this bypass kit but now something was block the engine.

the grey wire it says start sensing ac signal input.this wire was connect with other 12 volt ac wire in the car.is this wrong??should i connect this wire in the tach wire??i dont have any connection at the tach wire.

the car alarm working now but no the remote start engine.

can someone help me please??
sorry for my english...i am from Greece

[autotoys]

Sounds like you have something mis-wired or you are missing one of your remote start connections.

Please see the original retailer who sold you this unit for support.