Existing Customer: Post inside the "CUSTOMER's AREAs"


See our "real life" diy Autotoys.Com Installation videos here



shop now for our products (17+ years online)
+ Reply to Thread
Page 2 of 2 FirstFirst 1 2
Results 11 to 12 of 12

Thread: Power Window Module for 2 windows

  1. #11
    Join Date
    Mar 2010
    Posts
    6

    Default

    hello again, yes I would like to go farther in completing this project. If you can help me build this relay system to get this module working that would be great. I will need all the wire colors or if you have a list of all wire colors that would be great, I have some other projects that I am working on.

  2. #12
    Join Date
    Aug 2004
    Posts
    3,213

    Default

    Info on relays will be posted soon

    Here are the wires you may need to access

    Remote Start/Security

    Function Equipped Type iC
    PASSIVE ANTI-THEFT YES TRANSPONDER SEE NOTES



    Wire/Function Colour Location/Description Polarity
    iC


    12 VOLTS Yellow Ignition switch harness +



    IGNITION Green/violet Ignition switch harness +



    ACCESSORY Brown Ignition switch harness +



    ACCESSORY 2 * Pink/Black ignition switch harness +


    notes * turns on radio

    STARTER Red/blue Ignition switch harness +



    KEY SENSE Black/green Ignition switch harness +



    TACH SIGNAL Tan/white At coil on top of engine AC



    This is for the 4L engine. On the 5L engine, the tach wire is Red/blue.
    LOCK Pink/yellow In driver's kickpanel -



    UNLOCK Pink/green In driver's kickpanel -



    Some models are equipped with a feature called Slam-Lock which puts the doorlocks to sleep shortly after the vehicle is shut down. To test for this, open the driver's side window and lock the door from the inside switch and close the door. Wait 3 minutes and try to unlock the doors by reaching in and hitting the doorlock switch on the door. If they do not unlock, you will need to connect to the driver's doorpin wire. Please see the SLAM-LOCK diagram.
    ARM Yellow/black In driver's kickpanel -



    This is the driver’s doorpin wire. You must test this wire for proper connection. If this wire is ground when the door is open, you can pulse it at the same time as lock to arm the security system. If this wire is ground when the door is closed, you will need to add a relay. See the appropriate diagram for exact wiring instructions.
    DISARM Green/violet In driver's kickpanel -



    DRIVER LOCK MOTOR Pink/black In driver's kickpanel +



    DRIVER UNLOCK MOTOR Red/orange In driver's kickpanel +



    PASSENGER UNLOCK MOTOR Pink/orange In passenger kickpanel +



    DOMELIGHT / ALL DOORS Black/blue In driver's kickpanel +



    The vehicle’s computer sends out diagnostic pulses on this wire every 15-20 minutes. This may cause an after-market alarm to false. It is suggested that you add a relay to this wire when connecting to an alarm system. See the appropriate diagram for exact wiring instructions.
    DRIVER DOOR * Yellow/Black In harness behind drivers left kick panel -


    HOODPIN * Tan/Light Green In harness behind drivers left kick panel -


    TRUNK PIN Common with doorpin



    BRAKE SWITCH Brown/black At switch above brake pedal +



    PARKING LIGHTS Brown or White/black At light switch +



    HORN Yellow/green At steering column -



    DRIVER WINDOW UP White/black At switch in driver's door REV POL



    DRIVER WINDOW DOWN Tan/lt.blue At switch in driver's door REV POL



    PASSENGER WINDOW UP White/yellow At switch in driver's door REV POL



    PASSENGER WINDOW DOWN Tan/lt.blue At switch in driver's door REV POL



    REAR DRIVER WINDOW UP Green/orange At switch in driver's door REV POL



    REAR DRIVER WINDOW DOWN Yellow At switch in driver's door REV POL



    REAR PASSENGER WINDOW UP Yellow/black At switch in driver's door REV POL



    REAR PASSENGER WINDOW DOWN Red/yellow At switch in driver's door REV POL



    HEADLIGHTS Red/yellow At light switch +



    VSS WIRE Gray/black Behind instrument panel AC



    TRANSPONDER IGNITION * Red/Light Green Pin 1 of 4-pin connector near ignition switch +


    TRANSPONDER DATA 1 White/Lt Green 4 pin plug at immobilizer Data



    TRANSPONDER DATA 2 Gray/Orange 4 pin plug at immobilizer Data



    TRANSPONDER GROUND * Black/White Pin 2 of 4-pin connector near ignition switch -




    * iC info NOTES
    PLEASE NOTE: This vehicle is equipped with an IMMOBILIZER passive anti-theft system. Please refer to the security diagram before any remote start installation.
    PERSONAL NOTES
    Edit
    --------------------------------------------
    ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:

    Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
    Information provided may be outdated or inaccurate. Use proper installation techniques to verify.

    When in doubt, see a professional installer.

    SHOP NOW

    pic
    MECP CERTIFIED

    Our tech section: http://www.autotoys.com/tech
    Our Install Videos: http://www.youtube.com/user/TheAutotoys

+ Reply to Thread

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

     

Similar Threads

  1. Window Roll Up Wiring?
    By FordFan2 in forum MISC APPLICATIONS QUESTIONS (PUBLIC)
    Replies: 2
    Last Post: 04-25-2010, 10:25 PM
  2. Power Windows Not Working! Civic LX '93
    By Spazzin360 in forum MISC APPLICATIONS QUESTIONS (PUBLIC)
    Replies: 10
    Last Post: 05-20-2007, 02:23 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts