Reply With Quote
You need an interface to read off the can bus
see http://www.autotoys.com/x/product.php?productid=10472
|
Existing Customer: Post inside the "CUSTOMER's AREAs" |
See our "real life" diy Autotoys.Com Installation videos here |
 | shop now for our products (17+ years online) |
Speed Sensor and Backup sensor in a 2010 Ford F350 Diesel
Can anyone tell me the easiest place to tap into the speed sensor and back-up sensor on a 2010 F350 Diesel? I'm getting ready to install my AVIC D3 in my new truck.
You need an interface to read off the can bus
see http://www.autotoys.com/x/product.php?productid=10472
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
So I will be able to solder all of my wires straight to this interface? I don't have to go find any wires in my trucks harnesses to wire in the AVIC D3?! If so this will be a breeze.
Thanks
Yes, be sure to read description on which outputs it does have
* Compatible with THX, SONY, Shaker and Audiophile sound systems in applicable vehicles. (v1.1.4 or higher required)
* Data controlled RAP accessory output wire
* Data controlled parking brake wire
* Data controlled reverse trigger wire
* Data controlled vehicle speed sense wire
* Data controlled illumination output wire
* Retains factory-installed amplified audio system
* Retains rear seat entertainment and dual zone
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
