Reply With Quote
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the dash trim bezel. Remove (2) #10 hex- head screws securing the factory head unit and disconnect the wiring.
|
Existing Customer: Post inside the "CUSTOMER's AREAs" |
See our "real life" diy Autotoys.Com Installation videos here |
 | shop now for our products (17+ years online) |
97 jeep cherokee radio removal
i took the plate off the front but when i was going to remove the radio i was confused about the toll it needs to take the screws out
Disconnect the negative battery terminal to prevent an accidental short circuit. Unclip the dash trim bezel. Remove (2) #10 hex- head screws securing the factory head unit and disconnect the wiring.
--------------------------------------------
ALL INFORMATION PROVIDED FREE AND AS IS WITHOUT GUARANTEE OF ACCURACY:
Use information / suggestions / posts at your OWN RISK. Because of the evolving nature of cars, data may change at any time.
Information provided may be outdated or inaccurate. Use proper installation techniques to verify.
When in doubt, see a professional installer.
SHOP NOW
MECP CERTIFIED
Our tech section: http://www.autotoys.com/tech
Our Install Videos: http://www.youtube.com/user/TheAutotoys
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
